Applying Xtreme Cream: |  | 1.) Shake bottle well. 2.) Use damp sponge to apply, squeeze product liberally onto bottom and buff in circular motion into surface. Wipe on as you would do with a car wax. Rub in as much as needed to fully coat surface. Xtreme Cream can be applied with a buffer! 3.) Cover entire bottom as well as fins and rails. 4.) Let dry to haze. (Leave on overnight for best results). The longer it sits, the better Xtreme Cream bonds. 5.) Wipe off with soft cloth. Instantly, you will see and feel the difference! Xtreme Cream High Performance Bottom Coating will last approximately 2 months depending on use of board.
To Remove Xtreme Creme: Apply Blue Goo product per instructions. |  |  | | Xtreme Cream utilizes the Aurora Marine proprietary polymer VS721. It was originally developed for the marine and aerospace industries to reduce drag on boat hulls and the fuselage of aircraft. It was proven on the race course by winning the World Championship, National Championship as well as numerous other competitions and awards. Through continuing R&D we discovered that it had other applications including a substantial improvement in performance of Surfboards and Outrigger Canoes. Independent tests proved that XC reduced drag on the planing surface by 16% at 20 mph. This means increased speed, agility and acceleration that is critical to high performance maneuvers necessary to win competitions. It also allows younger surfers with lower body mass and strength to perform as well as, and often times better than their bigger brothers and sisters. Use on: Surfboards, Paddleboards, SUP's, Surfskis, Outrigger Canoes, Kiteboards, kayaks, or any fiberglass or epoxy surface. Use only on the bottom surface. Apply to fins as well. 4oz. bottle will coat approximately five short boards and three long boards. You can apply Xtreme Cream as much as you like for optimum performance. Each coat will build upon the last for the ultimate surface. Surfboard wax and stickers will not adhere to surface once Xtreme Cream is applied. |
